Cleated Inclined PVC Belt Conveyor|Introcon Conveyor systems

Inclined cleated belt conveyor handles bags, boxes, cartons, and parts. It may be set at any angle from horizontal to 45 degrees for various uses, including floor-to-floor conveying and the transportation of materials from building to truck or box car. Move products between floors, from floors to mezzanines, or to overhead conveyor lines and other areas where a items must be conveyed at an angle.

Systems are also manufactured with pocketed sidewall belts for conveying open food products, loose granulated products etc.

Inclined Cleated Belt Conveyor Range provided by Introcon enables conveying of bulk materials over very inclined/ steep angles up to 90 degrees. Our design provides for tight product transfers and the ability to fit into space-less areas.

High tensile strength cleated belts offer superior strength-to-weight ratio and are available in various styles and heights up to 40 meters. Cleats are welded to suit the customer desired spacing and never glued to the top surface of the belt. All components of our conveyors are produced on state-of-the-art manufacturing equipment.

Advantages of Introcon Cleated Belt Conveyors

Prevents Product Degradation: From the feed hopper to the discharge point, the belt is capable of turning through any angle up to a vertical line and back to the horizontal. This eliminates the need for multi drives and prevents product degradation.
No Spillage with steep angle Conveying: Once material is loaded onto the belt it is effectively contained between the Sidewalls and is prevented by the cross cleats from falling back.
Minimum Maintenance, Long Belt Life: The belt itself requires no maintenance and the reduced number of moving parts plus simple conveyor construction virtually eliminates costly downtime. The actual components used in the belt have been developed from high strength abrasion and wear resistant material to extend operational life.
Low Power Requirement, Quiet & Smooth Running: A clear advantage of Conveyor Belt system is the low power required to move the loaded belt. As the belt runs on rotating idlers, the low resistance results in a quiet system, an advantage when operating in close proximity to personnel.